Bb-electronics EIRP410-2SFP-T - Quick Start Guide Bedienungsanleitung PDF herunterladen

EIRP410-2SFP-T-0912qsg

Quick Start Guide

Elinx PoE Ethernet Switch

EIRP410-2SFP-T

Items Included

LED Chart

Ports

Log into the Switch

o Ethernet Switch

o CD with Support Manual

o This Quick Start Guide

o Panel Mount Bracket

1. Select a mounting location and install the

switch onto a piece of DIN rail or use the

included panel mount brackets for wall or

panel mounting

2. Connect power to the switch

 48 VDC

 For redundancy connect two separate power supplies

using the two DC inputs on the terminal blocks

 If only one power input is used the Fault LED will light.

LED

Status

Description

PWR

Green

The Switch is powered on

Off

The Switch is powered off

PWR1

Green

Power Source 1 is available

Off

Power Source 1 is unavailable

PWR2

Green

Power Source 2 is available

Off

Power source 2 is unavailable

Fault

Red

Power or Port failure

Off

Normal Operation

R.M

Green

The Switch is the master of a redundant ring

(X-Ring)

Off

The Switch is not the master of a redundant

ring.

Ports 9, 10

LNK/ACT

(SFP)

Green

SFP Port is linked

Blinking

Data is being transmitted or received

Off

Not connected to the network

FWD

P1 to P8

Green

The port is supplying power to the connected

device

Off

No device attached or no power is being

supplied

Ports

9, 10

(RJ-45)

Green

Port is linked

Blinking

Data is being transmitted or received

Off

Not connected to the network

Green

Operating at 1000M

Off

Disconnected or 10/100M

Ports

1 to 8

(PoE)

Green

Connected to the network

Blinking

Data is being transmitted or received

Off

Not connected to the network

Yellow

Operating in full-duplex

Blinking

Data collision

Off

Half-duplex or not connected

Note

Ports 1 to 8 are 10/100 PoE RJ-45, Ports 9 and 10 are

10/100/1000 RJ-45 or 100/1000 SFP.

RJ-45 ports: The RJ-45 ports auto-sense for 10 or 100 Mbps

device connections. The auto MDI/MDIX feature allows

connections to switches, workstation and other equipment

without changing straight through or crossover cabling. The

charts below show the cable pin assignments for straight

through and crossover cables.

PoE ports: The PoE ports on this switch follow Alternative A

standards and are limited to 15.4 Watts of power output per

port. Ports 1 thru 4 support the IEEE802.3af standard and

are classified as (PSE) power sourcing equipment, which

means they can be used to power (PD) powered devices.

1. Once power is applied and devices connected, the

switch will automatically discover standard and PoE

network devices.

MDI Cable Pinout

Signal

Tx+

Tx-

Rx+

Rx-

MDI-X Cable Pinout

Signal

Rx+

Rx-

Tx+

Tx-

Hardware Installation

Quick Start Guide 1

Inhaltsverzeichnis

Seite 1 - Quick Start Guide

EIRP410-2SFP-T-0912qsg Quick Start Guide Elinx PoE Ethernet Switch EIRP410-2SFP-T Items Included 123 LED Chart Ports Log into the Switch 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Bb-electronics EIRP410-2SFP-T - Quick Start Guide Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikationszubehör Bb-electronics EIRP410-2SFP-T - Quick Start Guide herunter. B&B Electronics EIRP410-2SFP-T - Quick Start Guide User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikationszubehör Bb-electronics EIRP410-2SFP-T - Quick Start Guide